Petunjuk instalasi untuk membenamkan Wangsamas Firmware:

  1. Download dan Install Arduino IDE dari http://arduino.cc/en/Main/Software

  2. Sambungan papan controller dengan komputer, pastikan komputer membaca papan controller. Arduino IDE mengandung penanda driver untuk PCB Arduino sehingga biasanya papan controller langsung dikenali yang dilanjutkan dengan instalasi driver pada komputer.

  3. Jika papan controller Anda adalah Arduino Clone, terkadang Anda perlu instal driver yang cocok dengan papan controller Anda. Ada driver Arduino Clone yang dapat didownload di situs wangsamas.com, jika tidak cocok maka Anda perlu memintanya kepada pemasok papan controller tersebut untuk diinstal juga.

  4. Mulai Arduino IDE dan buka berkas "Wangsamas.ino"

  1. Pilih jenis papan controller dan port yang tersambung untuk upload di Arduino IDE.

  2. Buka Configuration.h, baca petunjuk apakah ada yang perlu dimodifikasi agar cocok dengan 3D printer anda.

  1. Upload Wangsamas Firmware dengan tombol upload (Panah ke kanan di toolbar)

Wangsamas Firmware installation instructions:

  1. Download and Install Arduino IDE from http://arduino.cc/en/Main/Software

  2. Connect controller board to computer, make sure the computer read the controller board. The Arduino IDE contains signed drivers for Arduino boards, ussually controller board recognized and continued with driver installation automatically.

  3. If your board is Arduino Clone, sometimes you have to install additional driver that match your controller board. You can download Arduino clone driver in this site, but if it doesn't match you have to ask it from you controller board supplier.

  4. Start Arduino IDE and open "Wangsamas.ino"

  1. Choose your controller board and port that connected to upload.

  2. Open Configuration.h, read the guide for modification that match to your printer.

  1. Upload Wangsamas Firmware by click upload button (The right arrow in the toolbar)
Comments